Block paving driveways
Hot-water rotary at 150-180 bar, 65°C. Biocide pre-treatment, full sweep, joints re-sanded with kiln-dried jointing sand and brushed in dry. Optional polymeric jointing for high-traffic drives — locks the joints permanently.
Pressure Washing in Ayrshire
Hot-water rotary systems, the right pressure for the surface, and chemical pre-treatment that lifts the green tide without lifting the jointing. Most jobs done same day.
Same-day completion · Hot-water rotary kit · No surface damage guarantee
Same day
Most jobs done in one visit
Hot water
200 bar rotary, not a hire-shop unit
0 damage
Right pressure for every surface
Re-sand
Jointing restored after cleaning
The Service
A B&Q pressure washer on a 5-year-old block-paved drive does about 30% of the job and damages 100% of the jointing. The black tide line stays, the green corners stay, and the kiln-dried sand is blasted out of every joint — so by next spring the whole drive is sprouting weeds and moss is back through the gaps.
We run commercial hot-water rotary kit (200 bar, 21L/min, heat to 80°C) with chemical pre-treatment. The heat and dwell time do the work, so we don't have to crank the pressure and damage the surface. After cleaning, we re-sand the joints — properly — so the surface doesn't degrade.
It's the right call for anyone with a tired driveway, a green patio, slippery decking or a path you've stopped using because of moss. Most jobs are done in a single day and the price is fixed in writing.
Why It Matters
Driveways and patios degrade slowly — then suddenly. Here's the sequence we see most often.
Algae and moss on a path or patio is genuinely dangerous — and if a visitor slips, your home insurance can argue you knew about the hazard. A £180 clean is cheaper than an excess claim.
Once moss has rooted in jointing sand, every rain washes more out. Within 3-4 years the whole surface is unstable and slabs start to rock.
Sandstone, limestone and concrete left dirty for years develop black biofilm that bonds to the stone. Sometimes recoverable, sometimes not.
A 50m² patio cleaned and re-sanded for £400 vs a 50m² patio lifted and re-laid for £4,000 when the joints have failed. Maintain it or replace it — your choice.
Our Process
01
Send a photo and rough measurement — we can give you a fixed price by surface area, usually within the hour.
02
Surface biocide applied and given 10-15 minutes dwell time. Does 60% of the work before the washer touches it.
03
200 bar rotary cleaner with hot water — even, controlled, no banding or zebra-striping on stone surfaces.
04
Surface rinsed clean, joints re-sanded with kiln-dried sand (or polymeric if requested), optional sealer for stone surfaces.
05
Walk-through with you. We don't leave until you're happy and the surface is dry enough to walk on.
Why Choose Us
200 bar, 80°C, 21L/min — commercial grade, not hire-shop.
Most domestic drives and patios done in one visit.
Right pressure for each surface — sandstone, porcelain, block, concrete.
Kiln-dried sand restored to every joint as standard.
Biocide lifts moss and algae so the wash doesn't have to.
Per m² in writing — no surprise hourly creep.
In Detail
Different surfaces need different approaches. Here's what we do and use across the most common Ayrshire jobs.
Hot-water rotary at 150-180 bar, 65°C. Biocide pre-treatment, full sweep, joints re-sanded with kiln-dried jointing sand and brushed in dry. Optional polymeric jointing for high-traffic drives — locks the joints permanently.
Lower pressure (100-130 bar), hot water 80°C, surface-cleaner attachment to avoid banding. Optional impregnating sealer (Lithofin MN Stain-Stop) extends life and stops re-staining for 3-4 years.
Light pressure, hot water and pH-neutral cleaner. Porcelain is virtually maintenance-free but jointing compound between tiles can stain — we deep-clean and re-pigment if needed.
Wood-safe rotary head, low pressure (80-100 bar), oxygen-bleach-based timber cleaner. Re-oiling or re-staining quoted as an add-on for the same visit if you want a complete refresh.
Lower pressure, surface cleaner only — never close-up lance work which damages the binder. Optional tarmac-restore product to reblack faded surfaces.
Soft-wash system (low pressure, biocidal cleaner) — never rotary on render. Removes green algae without damaging the finish or pushing water behind the render.
Soft-wash and gutter-vac systems available — see the dedicated commercial pressure washing page for full roof and gutter work.
Commercial sites (pubs, car parks, holiday parks, warehouses) on quoted programmes — typically 6 or 12 monthly. RAMS provided, out-of-hours work available.
Where We Work
Same trusted local team in every town we cover.
Frequently Asked
Block-paved drives typically £3.50-£5/m² (a 40m² drive is around £150-£200). Patios £4-£6/m². Decking £4-£7/m². Re-sanding included; sealing is an optional add-on. Always quoted in writing.
Related Services
Pressure & Surface Cleaning
See the service
Pressure & Surface Cleaning
See the service
Pressure & Surface Cleaning
See the service
Looking for something else? View all services or back to home.
Photo quote in under an hour, most jobs done same day, joints re-sanded as standard. Optional sealing for 3+ years of protection.
Fully insured · Owner-operated · Same-day reply, 7 days a week