Block paving
150-180 bar rotary, 65-80°C water, biocide pre-treatment, kiln-dried sand re-jointed. Optional polymeric sand for high-traffic drives — sets like grout, locks every block. Optional impregnating sealer for 3-4 year protection.
Driveway Cleaning in Ayrshire
Block-Paved DrivesRestored to Like-Newin a Single Morning
Hot-water rotary clean, joints fully re-sanded, optional sealing — drives that look and stay better. Fixed price per square metre, same-day completion on most jobs.
Same-day completion · Joints re-sanded as standard · 3-year sealer option
-
Same day
Typical drive done in a morning
-
Re-sand
Kiln-dried sand restored to every joint
-
3 yr
Sealer protection option
-
Fixed
Price per m² in writing
The Service
Why Your Drive Looks Worse Every Year
Block-paved drives in Ayrshire face the worst of it — coastal rain, salt-laden air, tyre rubber, oil drips, leaf mulch, and the inevitable creeping black biofilm. Left alone, a drive that was a feature when it was laid becomes the worst-looking thing about your kerb appeal in 5-7 years.
Our driveway cleaning service is built specifically for block paving, with the right kit and the right after-treatment. Hot-water rotary surface cleaner at 150-180 bar removes the black tide line without firing block-jointing sand across the lawn. Then we re-sand the joints — properly, with kiln-dried sand, swept and vibrated in.
The result is a drive that looks newly laid and stays that way. With an optional impregnating sealer applied after cleaning, you get 3-4 years of protection from re-staining and stops weeds rooting in the joints.
Why It Matters
What Happens If You Leave the Drive Dirty
Block paving is forgiving — until it isn't. Here's the progression we see when drives are left for years.
Joints fail and blocks rock
Without sand in the joints, blocks lose lateral support. Within a few years the surface goes wavy and individual blocks rock under tyres.
Weeds rip the surface apart
Dandelion and thistle roots in joints can lift adjacent blocks. Pulling them often takes blocks with them.
Oil and tyre stains set permanent
Hot tyre marks and oil drips bond to dirty block surfaces. Cleaned annually they wipe off — left for 5 years they're often there for life.
Drive value drops with kerb appeal
Estate agents consistently cite drive condition as a top-5 first-impression factor. A grim drive can knock 1-2% off a sale price.
Our Process
How We Deliver Driveway Cleaning in Ayrshire
-
01
Photo or On-Site Quote
Send a photo with a tape measure in shot or we'll pop round — fixed quote by m².
-
02
Biocide Pre-Treatment
Surface biocide applied to kill algae and lichen. 10-15 minutes dwell time before any pressure goes on.
-
03
Hot-Water Rotary Clean
150-180 bar rotary surface cleaner with hot water — even pass across the whole drive, no banding.
-
04
Re-Sand Joints
Kiln-dried jointing sand brushed and vibrated into every joint until level. Dry surface needed — usually next-day if work is in cooler weather.
-
05
Optional Seal & Hand Over
Solvent or water-based impregnating sealer applied (if booked) for 3-4 years of stain and weed resistance.
Why Choose Us
The Difference, In Plain English
Drive looks newly laid
Hot-water rotary lifts the biofilm a DIY washer can't.
Joints fully restored
Kiln-dried sand re-applied as standard — not an upsell.
3-year sealer option
Resists oil, tyre marks and weed regrowth for 3-4 years.
No surface damage
Right pressure, right distance — no zebra-striping or block damage.
Same-day completion
Most drives finished in a single morning or afternoon.
Fixed price per m²
Quoted in writing — no hourly creep, no surprise extras.
In Detail
Driveway Cleaning — Surfaces & Specifications
Different drive surfaces need different methods. Here's what we do across the most common Ayrshire driveway types.
Tarmac drives
Surface cleaner only at low pressure — never close-up lance work which damages the binder and pulls aggregate loose. Optional tarmac-restorer black-up product to refresh faded surfaces and add UV protection.
Concrete & imprinted concrete
Hot-water rotary clean with appropriate pressure for the surface condition. Imprinted concrete almost always benefits from re-sealing after cleaning, as the original sealer fades and the colour goes flat without it.
Gravel drives
We don't pressure wash gravel — we re-rake, top up where needed, and treat with residual weed killer if requested. Often paired with a new edging install to stop migration.
Resin-bound surfaces
Soft brush wash with neutral pH cleaner — never rotary, never hot. Resin can be damaged by aggressive cleaning. Most resin drives only need an annual gentle clean.
Oil stain removal
Pre-treatment with degreaser, dwell time, agitation, then rotary clean. Old set-in stains may need 2 cycles. We're honest about what's recoverable and what isn't.
Sealing options
Solvent-based impregnating sealer (clear, no shine) or wet-look sealer (deepens colour). Both extend life, both resist oil and weed regrowth. Quoted as an add-on, typically £4-£6/m² on top of the clean.
Residential vs commercial
Commercial car parks, forecourts and trade premises on quoted maintenance programmes. RAMS, out-of-hours work and traffic management organised as needed.
Where We Work
Driveway Cleaning Across Ayrshire
Same trusted local team in every town we cover.
Frequently Asked
Honest Answers, Up Front
Typically £3.50-£5 per m² fully cleaned and re-sanded — a standard 40m² block-paved drive is £150-£200. Sealing is an optional extra at £4-£6/m².
Related Services
Often Booked Alongside Driveway Cleaning
Pressure & Surface Cleaning
Pressure Washing
See the service
Pressure & Surface Cleaning
Patio Cleaning
See the service
Pressure & Surface Cleaning
Path & Walkway Cleaning
See the service
Looking for something else? View all services or back to home.
Book Your Drive Clean This Week
Photo quote in under an hour, same-day completion in most cases, joints fully re-sanded. Optional 3-year sealer for lasting protection.
Fully insured · Owner-operated · Same-day reply, 7 days a week